Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2019 >> A3 Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Wiring) >> 97 Wiring >> Control Modules >> Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING >> Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING >> Removing

Vehicle Electrical System Control Module -J519- MOUNT, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi SQ5, 2020 Audi Q5 e, 2020 Audi Q5, 2019 Audi SQ5, and 2019 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the vehicle electrical system control module. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .

-- Free up the wiring harness -3-.

GWWA97-12918Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -1- and push the mount -4- upward until the guides -2- disengage.

-- Remove the mount downward.

scientia non olet · About Mike's Workshop Manuals