Overview - Windshield Wiper System, Rain/Light Recognition Sensor

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Windshield Wiper System, Rain/Light Recognition Sensor

Courtesy of AUDI OF AMERICA, LLC

Silicon Pad
- Replace after removal
Retaining Plate
- For Rain/Light Recognition Sensor -G397-
- Attached to the windshield
Clamp
Rain/Light Recognition Sensor -G397-
- Removing and installing. Refer to Rain/Light Recognition Sensor -G397-, REMOVING AND INSTALLING, VEHICLES WITH Humidity Sensor -G355- .
- Replacing. Refer to Rain/Light Recognition Sensor -G397-, REPLACING, VEHICLES WITH Humidity Sensor -G355- .