Vehicle Positioning System Interface Control Module -J843-, REMOVING AND INSTALLING, SEDAN: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- If necessary, release the retaining tab in direction of -arrow- and remove the towing recognition control module -3- from the frame -4-.
-- Set aside the towing recognition control module with the connectors -1 and 2- attached.
-- Disconnect the connector -1-.
-- Release the retaining tab -4- in direction of -arrow- and the interface control module -3- from the frame -2-.