Technical Data, Brakes
Front Brakes
| PR Number | 1ZF (15" Brakes) | ||
|---|---|---|---|
| Brake Caliper | Contiteves FS III | ||
| Brake Rotor | Diameter in mm | 276 | |
| New thickness | 24 | ||
| Wear limit | 21 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1ZE, 1ZP, 1ZQ, 1ZJ (15" Brakes) | ||
|---|---|---|---|
| Brake Caliper | PC-57 | ||
| Brake Rotor | Diameter in mm | 288 | |
| New thickness | mm | 25 | |
| Wear limit | mm | 22 | |
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1ZA, 1ZD (16" Brake) | ||
|---|---|---|---|
| Brake Caliper | PC-57 | ||
| Brake Rotor | Diameter in mm | 312 | |
| New thickness | 25 | ||
| Wear limit | 22 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1LB, 1LC, 1LJ S3 (17" Brake) | ||
|---|---|---|---|
| Brake Caliper | PC-60 | ||
| Brake Rotor | Diameter in mm | 340 | |
| New thickness | 30 | ||
| Wear limit | 27 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1LH, 1LU, 1LL, 1LN; RS3 (19" Brake) | ||
|---|---|---|---|
| Brake Caliper | Brembo | ||
| Brake Rotor | Diameter in mm | 370 | |
| New thickness | 34 | ||
| Wear limit | 32.4 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| Ceramic Front Brakes. Refer to TECHNICAL DATA, BRAKES. | ||
|---|---|---|
| Brake | Brembo | |
| PR number | 1LF | |
| Brake rotor, ventilated | Diameter in mm | 370 |
| Brake rotor, new thickness | mm | 34 |
| Brake rotor, wear limit | mm | Brake Rotor Thickness. Refer to CERAMIC BRAKE ROTOR, DETERMINING WEAR . |
| Brake pads, wear limit | mm | Refer to appropriate service information. |
Rear Brakes
| PR Number | 1KE / 1KR /2EJ | ||
|---|---|---|---|
| Brake Rotor | Diameter in mm | 272 | |
| New thickness | 10 | ||
| Wear limit | 8 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1KU | ||
|---|---|---|---|
| Brake Rotor | Diameter in mm | 282 | |
| New thickness | 12 | ||
| Wear limit | 10 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 2ED | ||
|---|---|---|---|
| Brake Rotor | Diameter in mm | 300 | |
| New thickness | mm | 12 | |
| Wear limit | mm | 10 | |
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Indicator Bracket - VAS 6079/1; Dial Indicator - 0-10mm - VAS 6079.
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1KY, 1KJ, 1KZ | ||
|---|---|---|---|
| Brake Rotor | Diameter in mm | 310 | |
| New thickness | 22 | ||
| Wear limit | 20 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.
| PR Number | 1KX, 2EE | ||
|---|---|---|---|
| Brake Rotor | Diameter in mm | 310 | |
| New thickness | 22 | ||
| Wear limit | 20 | ||
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
Brake pads wear limit. Refer to appropriate service information.