Perform any subsequent work using the Vehicle Diagnostic Tester:
The Vehicle Diagnostic Tester is connected.
- Select the Diagnostic mode and start the diagnosis.
- Select the Test plan tab.
- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Electrical system
- 01 - OBD-capable systems
- A5 - Driver Assistance Systems Front Camera - R242
- A5 - Driver Assistance Systems Front Camera Functions
- A5 - Control module calibrating
From here the Vehicle Diagnostic Tester advances the calibration procedure forward.
Now follow the instructions on the screen to perform the calibration.
NOTE: Next, determine the height of the body. - Enter the noted body height -a-.