Brake System, Visual Inspection For Leaks And Damage
WARNING:
Warning information for the high voltage system:
Procedures for which the ignition needs to be switched off. Refer to PROCEDURES FOR WHICH THE IGNITION NEEDS TO BE SWITCHED OFF .
WARNING:
Correct any malfunctions (repair procedure).
-- Check the following components for leaks and damages:
- Brake master cylinder
- Clutch slave cylinder (on manual transmissions only)
- Brake Booster
- ABS hydraulic unit
- Brake calipers
-- Check the entire length of brake hoses and cables. While doing this, pay attention to the following:
- Check brake hoses for porosity, bubbles and cracks.
- Check brake hoses and lines for chafing.
- Check brake line connections and mounts for proper seating, leakages and corrosion.
The brake hoses must not touch other vehicle components or be allowed to become twisted when at maximum steering angle.