Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2017 >> RS 7 Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Frame System (Service Information) >> Seat Frames >> Front Seats >> Headrest Guide, Removing And Installing >> Installing

Headrest Guide, Removing And Installing: Installing

NOTE:

The headrest guide can only be inserted in one position.

The guide tab -3- on the headrest guide must engage in cut-out of mount on the backrest frame.

Make sure the retaining tab(s) engage(s) correctly in backrest frame.

Installation is performed in reverse order of removal, while noting the following:

WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
  • Observe all measures when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
scientia non olet · About Mike's Workshop Manuals