Guidelines For Clean Working Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

It is necessary to maintain a high level of cleanliness when working on the ABS system. It is not permitted to use any products which contain mineral oil, such as oils, greases etc.
Thoroughly clean all connection points and their surrounding areas before loosening. However, do not use aggressive cleaning agents such as brake cleaner, gasoline, thinners or similar compounds.
Place the removed parts on a clean surface and cover them.
Carefully cover or seal opened components if repairs are not performed immediately (use plugs from Assembly Part Set: 5Q0 698 311 ).
Only use lint-free cloths
Remove the replacement parts from their packaging just prior to installing them.
Only use parts in their original packaging.
If the system is open, do not work with compressed air and do not move the vehicle.
Make sure that brake fluid cannot get into the connectors.