Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Charging System (Battery, Generator, Stop/Start System & Cruise Control)) >> 27 Battery, Starter, Generator, Cruise Control >> Adaptive Cruise Control >> Adaptive Cruise Control Module, Removing And Installing >> Distance Regulation Control Module -J428-, REMOVING AND INSTALLING >> Removing

Distance Regulation Control Module -J428-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

GWWA27-10434Courtesy of AUDI OF AMERICA, LLC

-- For Audi RS3, free up the wiring harness.

-- Remove the bolts -arrows-.

-- Remove the distance regulation control module -2-.

scientia non olet · About Mike's Workshop Manuals