Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2017 >> RS 3 >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Charging System (Battery, Generator, Stop/Start System & Cruise Control)) >> 27 Battery, Starter, Generator, Cruise Control >> Adaptive Cruise Control >> Adaptive Cruise Control Module, Removing And Installing >> Distance Regulation Control Module -J428-, REMOVING AND INSTALLING >> Installing

Distance Regulation Control Module -J428-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal. Note the following:

NOTE:

Check the connector for damage, contact corrosion and water ingress, and service if necessary. Refer to WIRING HARNESS AND CONNECTOR REPAIRS .

-- Calibrate the adaptive cruise control. Refer to ADAPTIVE CRUISE CONTROL, CALIBRATING .

scientia non olet · About Mike's Workshop Manuals