Distance Regulation Control Module -J428- Retaining Plate, Removing And Installing, Version 1: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the distance regulation control module. Refer to Distance Regulation Control Module -J428-, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

-- Open the tabs in direction of -arrows-.

-- Remove the cover -2- from the Distance Regulation Control Module -J428- -1-.

Fig 1: Adjusting Screw

Courtesy of AUDI OF AMERICA, LLC

-- Turn the quick release -2- counterclockwise in direction of -arrow-.

-- Remove the quick release from the stud bolts -1-.

-- Remove the retaining plate -3- from the Distance Regulation Control Module -J428- -4-.