Perform Any Subsequent Work Using the Vehicle Diagnostic Tester.
- Connect the Vehicle Diagnostic Tester.
- Switch the ignition on.
- Select and start the [Diagnostic] operating mode.
- Select the [Test plan] tab.
- Select the [select individual test] button and select the following tree structure consecutively:
- Body
- Electrical system
- 01 - OBD-capable systems
- A5 - Driver Assistance Systems Front Camera -R242
- A5 - Driver Assistance Systems Front Camera Functions
- A5 - Control module calibrating
- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
- Determine the body height -a- at all four wheels in the center of the wheel between the wheel contact surface and the lower edge of the fender or wheel housing.