Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2016 >> S8 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1023 (Seating System) >> Removal And Installation >> Heated Seat Module - Second Row >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    Remove the front floor console. For additional information, refer to Instrument Panel and Console .

  1. 2.

    Disconnect the 2 heated seat module electrical connectors at the bottom of the front floor console.

  1. 3.

    Remove the screw and unhook the heated seat module.

  1. 4.

    To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals