Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 687 (Instruments (Sedan)) >> 90 Instruments >> Clock >> Radio Frequency Controlled Clock Receiver, Removing And Installing >> Installing

Radio Frequency Controlled Clock Receiver, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

If the bumper cover was removed, the Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770- must be calibrated again. Refer to LANE CHANGE ASSISTANCE, CALIBRATING .

scientia non olet · About Mike's Workshop Manuals