Left Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S8, 2021 Audi A8 Quattro, 2020 Audi S8, 2020 Audi A8 Quattro, and 2019 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Replace the bolts that were tightened with an additional turn after removing them.

-- Install the A/C compressor on the bracket. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET or A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the engine support bridge. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .