Rear Peripheral Camera -R246-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

The Rear Peripheral Camera -R246- has a trailing cable. The vehicle wiring harness couplings are located in the rear lid.

-- Remove the lower rear lid trim panel. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -3 and 4- from the rear lid handle button.

Courtesy of AUDI OF AMERICA, LLC

The Rear Peripheral Camera -R246- -1- is permanently attached to the handle button.

-- Remove the nuts -2 and 5-.

-- Pull the handle button with the Rear Peripheral Camera -R246- -1- out of the retainer in the rear lid.