Control Module/Digital Sound System Amplifier, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2020 Audi S4, 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, and 2019 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Open the left storage compartment in the luggage compartment.

The bracket with the Digital Sound System Control Module -J525- must be removed first.

-- Release and disconnect the connectors -1- from the Digital Sound System Control Module -J525- -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :VAS6223/9 -1- onto the MOST Bus connector -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -arrows- on the bracket and remove the Digital Sound System Control Module -J525- -2- with the bracket.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.