Front Information Display Control Head Control Module -J523-, REMOVING AND INSTALLING, MMI BASIC: Removing

-- Open the glove compartment.

-- Insert two hooks from the Radio Removal Tool T10057 into the release slits on the Front Information Display Control Head Control Module -J523- until they engage. Points on the grip eyelets of tool face outward.

Fig 1: Insert Two Clips Of T10057 Into Release Slots Of Navigation System With Cd Drive Control Module Until They Engage

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Front Information Display Control Head Control Module -J523- from the mounting frame.

-- Pull Radio Removal Tool T10057 out by pressing on locking tabs on the Front Information Display Control Head Control Module -J523-.

-- Release and disconnect the connectors from the Front Information Display Control Head Control Module -J523-.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS6223/9 -1- onto the MOST bus connector -2-.

Fig 2: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9

Courtesy of AUDI OF AMERICA, LLC