Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2014 >> S7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (3.0L - Cooling System - Engine Code: CPNB) >> 19 Cooling System >> Coolant System/Coolant >> Cooling System, Checking For Coolant Leaks >> Notes

Cooling System, Checking For Coolant Leaks: Notes

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

Procedure 

Fig 1: Identifying Coolant Reservoir Cap
GWWA19-11108Courtesy of AUDI OF AMERICA, LLC
WARNING:

Risk of scalding due to hot steam and hot coolant.

  • The coolant system is under pressure when the engine is warm.
  • Reduce pressure by covering coolant reservoir cap with a cloth and carefully opening.

-- Remove the cap -arrow- from the coolant reservoir.

-- Position the Cooling System Tester VAG 1274B with the Cooling System Tester - Adapter VAG 1274/8 on the coolant reservoir.

Fig 2: Identifying Cooling System Tester VAG 1274B
GWWA19-11240Courtesy of AUDI OF AMERICA, LLC

-- Generate approximately 1 bar pressure using the cooling system tester hand pump.

-- If pressure falls, search for leaks and correct problem.