Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

-- Remove the rear noise insulation, refer to REAR NOISE INSULATION, REMOVING AND INSTALLING .

Vehicles with DSG Transmission 0B5: 

Fig 1: Removing Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- from the right coolant pipe on the transmission.

-- Remove bolts -arrows- and move the ATF cooler slightly to the side.

Fig 2: Identifying Bolts And ATF Cooler

Courtesy of AUDI OF AMERICA, LLC

Continuation for All Vehicles: 

-- Disconnect the connector -2-.

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.

Fig 3: Location Of Engine Speed (RPM) Sensor -G28-

Courtesy of AUDI OF AMERICA, LLC