Selector Mechanism: Overview
WARNING:
There is a risk of injury and accident from accidentally engaging a gear when the engine is running.
- Before performing work with the engine running, place the selector lever in the "P" position and engage the parking brake.
- Selector Lever Cable
- Do not bend.
- Refer to SELECTOR LEVER CABLE .
- Locking Plate
- Refer to SELECTOR LEVER CABLE .
- Selector Lever Cable Bolts
- Refer to SELECTOR LEVER CABLE .
- Clamp
- Refer to SELECTOR LEVER HANDLE .
- Selector Lever Boot
- Trim Ring
- Selector Lever Handle
- Refer to SELECTOR LEVER HANDLE .
- Selector Lever Transmission Range Position Display Unit -Y26-
- Removing and installing. Refer to Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING .
- Bolt
- 1 Nm
- Quantity: 4
- Selector Lever Sensor System Control Module -J587- with Tiptronic Switch -F189-
- Removing and installing. Refer to Selector Lever Sensor System Control Module -J587- WITH Tiptronic Switch -F189-, REMOVING AND INSTALLING .
- Shift Lock Solenoid -N110-
- Removing and installing. Refer to Shift Lock Solenoid -N110-, REMOVING AND INSTALLING .
- Refer to SELECTOR MECHANISM, PERFORMING EMERGENCY RELEASE .
- Selector Mechanism Function Unit
- Checking, Refer to GEARSHIFT MECHANISM, CHECKING .
- Removing and installing. Refer to SHIFT MECHANISM FUNCTION UNIT, REMOVING AND INSTALLING .
- Refer to SELECTOR MECHANISM FUNCTION UNIT .
- With Transmission Park Selector Switch -F305-
- Removing and installing. Refer to Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING .
- Threaded Pin
- 6.5 Nm
- Quantity: 4
- For the selector mechanism function unit to the lower section.
- Bolt
- 6.4 Nm
- Quantity: 2
- For the centering bracket to the lower section of the selector mechanism function unit.
- Bolt
- 10 Nm
- Quantity: 4
- For the lower section of the selector mechanism function unit to the body.
- Selector Mechanism Function Unit Lower Section
- Removing and installing. Refer to SELECTOR MECHANISM FUNCTION UNIT LOWER SECTION, REMOVING AND INSTALLING .
- Centering Bracket
- May not be installed again if it is damaged or removed; necessary for factory production only.