Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2013 >> S7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Controls, Housing - Continuously Variable Transmission) >> 37 Controls, Housing >> Selector Mechanism >> Selector Mechanism, Removing And Installing >> Installing

Selector Mechanism, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi A6 Quattro, 2014 Audi A6, and 2013 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Lubricate the ball socket on the selector lever cable with Polycarbamide GreaseG 052 142 A2 before installing.

Do not bend or kink the selector lever cable.

-- Adjust the selector lever cable, refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism, refer to GEARSHIFT MECHANISM, CHECKING .

-- Install the front ashtray or storage compartment, refer to FRONT ASHTRAY/STORAGE COMPARTMENT .

-- Install the selector lever handle, refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .

scientia non olet · About Mike's Workshop Manuals