Steering Angle Sensor -G85-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The steering wheel must be in its center position when removing and installing the Airbag Spiral Spring/Return Spring with Slip Ring -F138- (the vehicle wheels are in the straight ahead position).
-- Lower the steering wheel as far as possible.
-- Remove the driver airbag. Refer to DRIVER SIDE AIRBAG .
-- Remove the steering wheel. Refer to STEERING WHEEL, REMOVING AND INSTALLING .
-- Remove the steering column trim. Refer to STEERING COLUMN SWITCH MODULE UPPER TRIM .
-- Remove the Airbag Spiral Spring/Return Spring with Slip Ring -F138- -2- from the switch module -3-. Refer to STEERING COLUMN SWITCH MODULE LOWER TRIM .