Selector Mechanism, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

-- Install the selector mechanism function unit and tighten it from the top.

-- Install selector lever cable, refer to Installing .

-- Adjust the selector lever cable, refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism, refer to GEARSHIFT MECHANISM, CHECKING .

-- Install the driveshaft intermediate bearing, refer to DRIVESHAFT, DRIVESHAFT BOLTED ON TRANSMISSION SIDE .

-- Install the front ashtray or storage compartment, refer to FRONT ASHTRAY/STORAGE COMPARTMENT .

-- Install the selector lever handle, refer to Installing .

• Perform "Guided Functions" using the Vehicle Diagnostic Tester after removing and installing the selector mechanism function unit, refer to TRANSMISSION GUIDED FUNCTIONS .