Distance Regulation Control Module - J428- / Distance Regulation Control Module 2 - J850-, Removing and Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air intake grille. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, AUDI A7/S7 THROUGH MY 2014 or AIR INTAKE GRILLE, REMOVING AND INSTALLING, AUDI A7/S7 FROM MY 2015 .
- Unclip the cover.
- Remove the screws -1, 2 and 3-.
NOTE:
Clean and dry the area around the control module connector.
- Disconnect the connector -arrow-.
- Remove the distance regulation control module -A- from the bumper cover.