Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1780 (2.0L - Ignition/Glow Plug System - Engine Code: CVCA (Hatchback)) >> 28 Ignition/Glow Plug System >> Removal And Installation >> Glow Plug >> Installing

Glow Plug: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install glow plugs connector -1- on the glow plug in direction of -arrow-.

Fig 1: Identifying Pressing On Glow Plug Connector
GWWM97-0530Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Make sure the glow plug connectors are securely fastened.

-- Install the engine cover, refer to ENGINE COVER .