Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 4.0L - Engine Assembly - Engine Code: CEUC >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine, Installing >> Tightening Specifications

Tightening Specifications

NOTE:

The tightening specifications apply only to lightly greased, oiled, phosphated or blackened nuts and bolts.

Additional lubricants, such as engine or transmission oil are permissible, although lubricants containing graphite are not.

Do not use any parts that have had the lubrication removed.

Tightening specification tolerance: ±15%.

Component Nm
Bolts and nuts M6 9
M7 15
M8 20
M10 40
M12 65
scientia non olet · About Mike's Workshop Manuals