Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Engine Intake System - Intake (Induction) (H4DO)) >> Air Intake Boot >> Removal

Air Intake Boot: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the clip (A) from the air intake boot assembly.
  2. Loosen the clamp (B) which connects the air intake boot assembly and air cleaner case.
  3. Loosen the clamp (C) which connects the air intake boot assembly and throttle body.
    Fig 1: Identifying Air Intake Boot Assembly Clip And Clamp
    G07664986Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the PCV hose assembly and remove the air intake boot assembly.
scientia non olet · About Mike's Workshop Manuals