Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1560 (Ignition/Glow Plug System [CNRB]) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Engine Speed Sensor -G28-, Removing And Installing >> Removing

Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg and 2013 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the connector -2-.

Fig 1: Identifying Engine Speed Sensor
GWWA28-10042Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.

scientia non olet · About Mike's Workshop Manuals