Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1092 (EPAS Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Test E: PSCM DTC C1B00 Steering Angle Sensor >> DTC Trigger

DTC Trigger

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

This DTC sets if the sum of the 2 steering shaft torque sensors do not equal a specified voltage level. This can occur if the wiring harness is damaged, chewed, or the connectors are loose or damaged. An internal steering gear or PSCM fault can also cause this DTC to set. For additional fault setting information, refer to the PSCM DTC Chart.

scientia non olet · About Mike's Workshop Manuals