Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2012 >> S4 Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Wiper System & Washer System) >> Wiper Blade >> Assembly >> Front

Wiper Blade: Assembly: Front

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the wiper rubber onto the blade so that the stopper is in the position shown in the illustration.
    Fig 1: Locating Stopper Position
    G07681303Courtesy of SUBARU OF AMERICA, INC.
  2. Make sure the wiper rubber is securely fastened to the pull stopper (A).
    Fig 2: Pulling Stopper
    G07681304Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals