Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Components | Fastener Size | Nm |
|---|---|---|
| Actuator for intake manifold change-over to upper intake manifold | - | 2.5 |
| Ball pin to upper intake manifold | - | 2.5 |
| Bracket for throttle valve control module to upper intake manifold | - | 6 |
| Camshaft position sensor to housing | - | 9 |
| Fuel pressure sensor to fuel rail | - | 20 |
| High-pressure line to bracket | - | 9 |
| High pressure line protective plate to engine | - | 9 |
| High pressure line union nut | - | 27 |
| High pressure pump to housing | - | 20 |
| Intake manifold tuning valve position sensor to upper intake manifold | - | 2.5 |
| Low fuel pressure sensor | - | 15 |
| Oxygen sensor | - | 55 |
| Retaining bracket for fuel rail to lower intake manifold | ||
| - Bolt | - | 2.5 |
| - Nut | - | 9 |
| Threaded support | - | 40 |