ATF Cooler, Removing And Installing: Removing

Fig 1: Identifying Subframe Crossbrace

Courtesy of AUDI OF AMERICA, LLC

-- Remove the subframe crossbrace, refer to Subframe .

CAUTION:

The suspension components could be damaged.

Do not rest the vehicle on its wheels if the subframe mount, the steering gear or the subframe crossbrace are not installed correctly.

-- Place the Used Oil Collection and Extraction Unit SMN 372500 under the transmission.

Fig 2: Identifying ATF Cooler & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clamps -1 and 4- and disconnect the ATF pipes.

NOTE:

Place a clean cloth under the separating point to catch the escaping coolant.

-- Loosen the clamps -2 and 3- and then seal off and remove the coolant hoses Hose Clamps - Up To 25mm 3094.

-- Remove the bolts -arrows- and remove the ATF cooler.