Securing On Engine And Transmission Holder

Special Tools And Workshop Equipment Required

Holding Plate VW 309A
Engine And Transmission Holder VAS 6095

Procedure

Fig 1: Identifying Support Tool 3311, Bolt 3311/1 And Holding Plate VW 309

Courtesy of AUDI OF AMERICA, LLC

Hold the transmission with the Shop Crane VAS 6100. Refer to TRANSMISSION, TRANSPORTING .

-- Attach the Holding Plate VW 309A to the Hook And Support Tool 3311.

-- Place the transmission using the Shop Crane VAS 6100 in the Engine And Transmission Holder VAS 6095.

NOTE:

The vents for the transmission housing and final drive must be closed before turning a filled transmission with Automatic Transmission Fluid (ATF) pan upward on the engine/transmission holder.