Selector Mechanism, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

-- Install the selector mechanism function unit and tighten it from the top.

-- Install selector lever cable. Refer to Installing .

-- Adjust the selector lever cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING .

-- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING .

-- Install the driveshaft intermediate bearing. Refer to REAR FINAL DRIVE 0BC, 0BD, 0BE & 0BF .

-- Install the front ashtray or storage compartment. Refer to FRONT ASHTRAY/STORAGE COMPARTMENT or STORAGE COMPARTMENT .

-- Install the selector lever handle. Refer to Installing .