Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2012 >> A6 2.0T >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - Continuously Variable Transmission >> 37 Controls, Housing >> ATF Circuit >> ATF Cooler, Removing And Installing >> Installing

ATF Cooler, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

CAUTION:

Danger of causing damage to the transmission.

  • Remove all the plugs on the ATF pipes and on the transmission that were installed during removal.
  • The ATF cooling function will not work and the transmission will be damaged if the plugs are forgotten.

-- Fill the engine coolant, refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About Mike's Workshop Manuals