| 1 |
- PERFORM: Preliminary Check to verify the customers complaint. Refer to PRELIMINARY CHECK
.
-- Was Complaint verified? |
-- YES:
-- NO:
- GATHER more information from customer about the complaint.
|
| 2 |
- IGNITION: OFF.
- DISCONNECT: Intake Manifold Runner Control Valve -N316- harness connector.
- CHECK: Intake Manifold Runner Control Valve -N316- component connector terminals 1 to 2 for resistance.
- SPECIFIED VALUE: 5 - 30 Ω (@ approx. 20° C).
-- Was Value obtained? |
-- YES:
-- NO:
|
| 3 |
- IGNITION: ON.
- CHECK: Intake Manifold Runner Control Valve -N316- harness connector terminal 1 to ground for voltage.
- IGNITION: OFF.
- SPECIFIED VALUE: Battery voltage.
-- Was Value obtained? |
-- YES:
-- NO:
|
| 4 |
- REMOVE: Engine Control Module - J623-. Refer to appropriate service information.
- CHECK: Intake Manifold Runner Control Valve -N316- harness connector terminal 2 to the Engine Control Module - J623- harness connector T94 / 36 for resistance.
- SPECIFIED VALUE: 0.5 Ω (± 0.3 Ω).
-- Was Value obtained? |
-- YES:
-- NO:
|
| 5 |
Refer To The Final Procedure Below; |