Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2011 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (4.2L - Generic Scan Tool, Engine Code(S): BVJ (St-Generic Scan Tool)) >> ST - Generic Scan Tool >> On Board Diagnostic >> Generic Scan Tool Article Contents

Generic Scan Tool Article Contents

WARNING: This page is about a different car, the 2011 Audi A6, 2010 Audi A6, 2009 Audi A6, 2008 Audi A6, and 2007 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Included in the contents of this GST article is a summary table of the vehicle specific OBD II Emission Related Engine and Transmission DTCs. This table contains all necessary Malfunction Criteria, Threshold Values, Secondary Parameters, Enabling Conditions, Monitoring Time Length, Frequency of Checks, and MIL Illumination to accurately monitor and diagnose the Engine Emissions and Transmission and perform all functions required to run Modes 01 through 09 with a hand held scan tool. For a further description of the monitor strategies, a document reference has been provided throughout this GST article to the applicable OBD System Strategy document.

This GST article also contains the step by step pin point test procedures to accurately diagnose the suspected component or system once a DTC has been set. All references to repair procedures and wiring diagrams will be found within the diagnostic test procedure.

scientia non olet · About Mike's Workshop Manuals