Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2009 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (3.2L - Engine Assembly - Engine Code: BKH) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 Audi A6, 2008 Audi A6, 2007 Audi A6, 2006 Audi A6, and 2005 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Components Bolt Size Nm
Torque bracket   40
Engine mount bracket
Nut   40
Bolt   75
Engine support
    40
    40
Bolts/nuts
  M6 9
  M8 20
  M10 40
  M12 65
Exceptions:
Fuel hose to fuel line   22
Hose clamps 9 mm wide   3
Hose clamps 13 mm wide   5.5
Drive plate to torque converter   85 1)
B+ terminal to starter   16
  • 1) Replace ribbed bolts; only use original equipment bolts.

Engine/Multtronic Transmission, Fastening 

Fig 1: Engine To Transmission Fasteners And Alignment Sleeves -A-
GWWA10-10069Courtesy of AUDI OF AMERICA, LLC
Item Bolt 1) Nm
1, 7 M10x100 65 2)
2 M12x120 65
3, 5 M12x100 65
4, 6 M12x95 65
8, 9, 10 M10x70 45
A Alignment sleeves for centering
  • 1) Replace engine/transmission securing bolts.
  • 2) Bolt class 10.9.

Engine/Automatic Transmission 09L, Fastening 

Fig 2: Engine To Transmission Fasteners And Alignment Sleeves -A-
GWWA10-10069Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 M10x100 65 1)
2, 6 M12x120 65
3, 4, 5 M12x105 65
7 M12x130 65
8, 9, 10 M10x80 45
A Alignment sleeves for centering
  • 1) Bolt class 10.9.
scientia non olet · About Mike's Workshop Manuals