Cooling System Components
→ Coolant Hose Connection Plan, without Auxiliary Heater
→ Coolant Hose Connection Plan, with Auxiliary Heater
→ Cooling System, Draining and Filling
→ Coolant Pump and Coolant Regulator, Component Overview
→ Coolant Pump, Removing and Installing
→ Coolant Temperature Housing, Removing and Installing
→ Coolant Thermostat Opening Data
→ Engine Coolant Temperature Sensor, Removing and Installing
→ After-Run Coolant Pump, Removing and Installing
→ Coolant Pipes, Component Overview
→ Lower Front Coolant Line, Removing and Installing
→ Front Coolant Line, Removing and Installing
→ Rear Coolant Line, Removing and Installing
→ Left Coolant Pipe, Removing and Installing
→ Lower Left Coolant Pipe, Removing and Installing
→ Right Coolant Pipe, Removing and Installing
→ Radiator, Removing and Installing
→ Left Auxiliary Cooler, Removing and Installing
→ Right Auxiliary Cooler, Removing and Installing
→ Cooling System, Checking for Leaks
→ Fan Shroud, Removing and Installing
→ Coolant Fan, Removing and Installing
- When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.
- Arrows on coolant pipes and coolant hoses must line up across from each other.
- During installation, reinstall all heat insulation sleeves and heat shields at the same locations.