Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2007 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (3.0L - Engine Assembly - Engine Code: CCAA) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2011 Audi A6, 2010 Audi A6, and 2009 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Component Bolt Size Nm
Bolts/Nuts    
  M6 9
  M7 15
  M8 20
  M10 40
  M12 65
Exceptions:
Drive Plate to Torque Converter 1 - 85
Left Engine Mount Bracket
Nut - 40
Bolt - 75
Left Engine Support
Nut - 40
Bolt - 75
Right Engine Mount
Nut - 40
Bolt - 75
Right Engine Support, Nut and Bolt - 40
Torque Bracket - 40
Torque Support Stop - 40
  • 1 Replace the bolts; only use original equipment bolts. Refer to the Parts Catalog.

Automatic Transmission to Engine Fastener

Fig 1: Automatic Transmission To Engine Fastener And Alignment Sleeves -A- (3.0L, Engine Code CCAA)
GWWA10-11090Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 M10 x 100 1) 65
2, 6 M12x120 65
3, 4, 5 M12 x 105 65
7 M12x130 65
8, 9, 10 M10x80 45
A Alignment sleeves for centering
  • 1) Bolt class 10.9.
scientia non olet · About Mike's Workshop Manuals