Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Component | Bolt Size | Nm |
|---|---|---|
| Bolts/nuts | ||
| M6 | 9 | |
| M8 | 20 | |
| M10 | 40 | |
| M12 | 65 | |
| Exceptions: | ||
| Drive plate to torque converter | 85 1 | |
| Engine carrier | 120 + 180°1 | |
| Engine mount, left | 60 | |
| Engine mount, right | 60 | |
| Left engine support | ||
| Bolt | 50 + 90°1 | |
| Nut | 75 | |
| Right engine support | ||
| Bolt | 50 + 90°1 | |
| Nut | 75 | |
|
||
Engine/Transmission, Fastening
| Item | Bolt | Nm |
|---|---|---|
| 1, 2 | M10x70 | 45 |
| 3 to 6 | M12 x 80 | 80 |
| 7 | M12x140 | 80 |
| 8 | M12x70 | 80 |
| 9, 10 | M12x50 | 80 |
| A | Alignment sleeves for centering | |