Clean Working Conditions
WARNING: This page is about a different variant/trim than selected.
- Always clean connection places and surrounding areas with engine or brake cleaner before loosening and dry cleaned places.
- Clean the transmission and transmission components using cleaning solution -D 009 401 04-.
- Use lint-free cloths when cleaning, for example, the WYPALL X70/WORKHORSE cloth made by Kimberly-Clark Professional.
- Seal all open lines and connections immediately with clean plugs or caps from the engine plug set VAS 6122.
- Place removed parts on a clean surface and cover them. Use foil and paper. Use a lint-free cloth!
- Carefully cover or plug unpacked components if repairs cannot be performed immediately.
- Only install clean components: Remove the replacement parts from their packaging just prior to installing them.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.