Fastener Tightening Specifications

Component

Bolt Size

Bracket for Selector Lever Cable, Nut

Cover for the Selector Mechanism Function Unit, Nut ⁽¹⁾

Final Drive Support ⁽¹⁾

40 + 90°

Housing for Transmission Oil Filter

Inspection Plug

Locking Plate

3.5

Locking Spring

3.5

Mounting Bracket for selector lever cable on transmission

Oil Drain Plug

Overflow Pipe

Pendulum Support ⁽¹⁾, ⁽²⁾

40 + 90°

100 + 90°

Selector Mechanism Function Unit, Nut

Selector Mechanism Function Unit, Nut from 11.2009

Transmission Fluid Cooler ⁽¹⁾

20 + 45°

Transmission Mount ⁽¹⁾, ⁽³⁾

40 + 90°

60 + 90°

⁽¹⁾	Always replace

⁽²⁾	For bolt tightening clarification, refer to SUBFRAME MOUNT OVERVIEW and see items -2 and 13-

⁽³⁾	For bolt tightening clarification, refer to SUBFRAME MOUNT OVERVIEW and see items -14 and 15-

Attaching the Transmission to a 2.0L TFSI Engine

Fig 1: Identifying Direct Shift Automatic Transmission To Engine Mounting Bolts

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1, 3, 10	M12x55	80
5, 9	M12x70	80
6, 7, 8	M10x50	40
2, 4	Starter mount, refer to [For engine(s) CBRA, BPY, CCTA, CBFA] Removal and Installation
A	Alignment sleeves for centering

Attaching the Transmission to a 2.0L TDI CR Engine

Fig 2: Identifying Direct Shift Automatic Transmission To Engine Mounting Bolts

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1, 3, 10	M12x55	80
5	M12x65	80
6	M12x50	80
7, 8	M10x50	40
9	M12x70	80
2, 4	Starter mount, refer to [For engine(s) CBRA, BPY, CCTA, CBFA] Removal and Installation
A	Alignment sleeves for centering