Transmission, Transporting

Special tools and workshop equipment required

Procedure

The transmission support 3282 can be used when transporting the transmission as well as for setting up the -T10013-.

Fig 1: Attaching Workshop Crane VAS 6100 To Bracket T10013

Courtesy of AUDI OF AMERICA, LLC

-- Remove threaded studs from T10013 by releasing circlip.

-- Secure the T10013 with a bolt -1- M8x40 and a shim, with outer 30 mm diameter, to the transmission lifting eye.

CAUTION:

When transporting, make sure transmission fluid cooler is not damaged.

-- Engage VAS 6100 on T10013.