3.2L - Fuel Injection & Ignition, Engine Code(S): BHE
- 24 Multiport Fuel Injection (MFI)
- Motronic injection system, servicing
- Safety precautions
- Rules for cleanliness
- Technical data
- Component locations, overview
- Notes
- Location of Throttle Position (TP) sensor -G79- and Accelerator pedal position sensor 2 -G185-
- Location of Brake light switch -F- and Brake pedal switch -F47-
- Location of oxygen sensors before catalytic converter
- Location of oxygen sensors behind catalytic converter
- Location of Fuel Pump (FP) relay -J17-
- Location of Motronic ECM power supply relay -J271- and Secondary Air Injection (AIR) pump relay -J299-
- Location of Engine speed (RPM) sensor -G28- with 3-pin connector
- Location of Secondary Air Injection (AIR) solenoid valve -N112-
- Location of Intake manifold change-over valve -N156-
- Location of Engine Coolant Temperature (ECT) sensor -G62-
- Location of Knock Sensor (KS) 1 -G61-
- Location of Knock Sensor (KS) 2 -G66-
- Air cleaner, disassembling and assembling
- Intake manifold, removing and installing
- Intake manifold, component overview
- Wiring and component check on engine control module with test box VAG1598/31
- Engine control module, removing and installing
- Fuel system pressure, pressure regulator and holding pressure, checking
- Fuel rail with injectors, disassembling and assembling
- Fuel injectors, removing and installing
- Injection quantity, leak tightness and spray pattern of injectors, checking
- Oxygen sensors before catalytic converter, removing and installing
- Oxygen sensors behind catalytic converter, removing and installing
- Motronic injection system, servicing
- 28 Ignition/Glow plug system