Section 15 (3.0L - Ignition System, Generic Scan Tool, Engine Codes: AVK, BGN)

• Ignition System
  • Ignition system, checking
    • General notes on ignition system
    • Safety precautions
    • Technical data, ignition
    • Ignition coils with power output stages, checking
      • Recommended special tools and equipment
      • Test requirement:
      • Procedure
      • Check Ground (GND) connection
      • Checking voltage supply
      • Checking activation of power output stages
      • Final procedures
    • Check knock sensors
      • Notes
      • Test requirement:
      • Checking knock sensor wiring
      • Check wires from knock sensors to Engine Control Module (ECM)
      • Final procedures
    • Check Camshaft Position (CMP) sensor
      • Notes
      • Test requirement:
      • Checking activation
      • Checking voltage supply
      • Checking signal wire
      • Checking Ground (GND) wire
      • Checking wire connections between Camshaft Position (CMP) sensor and Engine Control Module (ECM)
      • Final procedures