3.0L - Exhaust System, Emission Controls, Generic Scan Tool Engine Codes: AVK, BGN

• Exhaust system, Emission controls
  • Exhaust system components, removing and installing
    • Notes
    • Exhaust system for vehicles with Front Wheel Drive (FWD) - Component overview
    • Exhaust system for vehicles with All Wheel Drive (AWD) - Component overview
      • Notes
      • Installed position of front clamping sleeves
      • Installed position of rear clamping sleeves
      • Individual left mounting components for vehicles with manual transmission
      • Individual right mounting components for vehicles with manual transmission
      • Individual left mounting components for vehicles with automatic transmission 01V
      • Individual right mounting components for vehicles with automatic transmission 01V
      • Individual left mounting components for vehicles with automatic transmission 01J
      • Individual right mounting components for vehicles with automatic transmission 01J
    • Three Way Catalytic Converter (TWC), checking
    • Oxygen sensors before catalytic converter, removing and installing
      • Recommended special tools and equipment
      • Removing
      • Installing
        • Notes
        • Tightening torque
    • Oxygen sensors behind catalytic converter, removing and installing
      • Recommended special tools and equipment
      • Removing left oxygen sensor behind catalytic converter
        • Notes
        • Vehicles with automatic transmission
        • All:
      • Removing right oxygen sensor behind catalytic converter
      • Installing
        • Notes
        • Tightening torque
    • Left front exhaust pipe with catalytic converter, removing and installing (vehicles with manual transmission)
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Right front exhaust pipe with catalytic converter, removing and installing (vehicles with manual transmission)
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Left front exhaust pipe with catalytic converter, removing and installing (vehicles with automatic transmission 01J)
      • Recommended special tools and equipment
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Right front exhaust pipe with catalytic converter, removing and installing (vehicles with automatic transmission 01J)
      • Recommended special tools and equipment
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Left front exhaust pipe with catalytic converter, removing and installing (vehicles with automatic transmission 01V)
      • Recommended special tools and equipment
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Right front exhaust pipe with catalytic converter, removing and installing (vehicles with automatic transmission 01V)
      • Special Tools and Equipment
      • Removing
      • Installing
        • Notes
        • Tightening torques
    • Align exhaust system tension-free (vehicles with front wheel drive)
    • Align exhaust system tension-free (vehicles with all wheel drive)
      • Notes
      • Tailpipes, aligning
    • Check exhaust system for proper seal
  • Secondary air system
    • Notes
    • Principle
    • Function
    • Component overview
      • Notes
      • Component location of Secondary Air Injection (AIR) Solenoid Valve -N112-
      • Component location of Secondary Air Injection (AIR) Pump Motor -V101-
      • Component location of Secondary Air Injection (AIR) Pump Relay -J299-
      • Combination valve for Secondary Air Injection (AIR) system
      • Secondary Air Injection (AIR) Pump Motor -V101-, removing and installing
        • Notes
        • Installing
        • Tightening torques
      • Removing and installing left combination valve for Secondary Air Injection (AIR) system
        • Notes
        • Installing
        • Tightening torques
      • Removing and installing right combination valve for Secondary Air Injection (AIR) system
        • Notes
        • Installing
        • Tightening torques
    • Checking secondary air system for proper seal
      • Notes
      • Final procedures
    • Combination valves for Secondary Air Injection (AIR) system, checking function and for proper seal
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
      • Final procedures
    • Secondary Air Injection (AIR) Solenoid Valve -N112-, checking
      • Recommended special tools and equipment
      • Test requirements:
      • Procedure
      • Checking internal resistance
      • Checking voltage supply
      • Checking control wire
      • Final procedures
    • Secondary Air Injection (AIR) Pump Relay -J299- and activation, checking
      • Recommended special tools and equipment
      • Test requirements:
      • Test sequence
      • Checking voltage supply of Secondary Air Injection (AIR) pump relay
      • Check activation of the Secondary Air Injection (AIR) pump relay
      • Check voltage supply of the Secondary Air Injection (AIR) pump motor
      • Final procedures