Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Audi >> 2000 >> S4 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Controls - Service & Adjustment Specifications) >> Quick-Service >> Accessory Drive Belt Inspection

Accessory Drive Belt Inspection

WARNING: This page is about a different car, the 2000 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Removing and installing accessory drive belt is an in-depth procedure. Visually inspect accessory drive belt while installed on engine. Ensure belt has no splits, cracks or other damage. If necessary to remove and replace accessory drive belt, see REMOVAL, OVERHAUL & INSTALLATION article.

scientia non olet · About Mike's Workshop Manuals