2.7L (Engine Codes: APB, Bel)
SPECIFICATIONS INDEX - C5 PLATFORM - 2.7L (ENGINE CODES: APB, BEL)
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | REFRIGERANT CIRCUIT, SERVICING A/C SYSTEM, CHECKING AND TESTING CAPACITIES |
|
| Torque | COMPRESSOR (WITH A/C CLUTCH -N25), REMOVING AND INSTALLING COMPRESSOR WITH A/C COMPRESSOR REGULATOR VALVE -N280, REMOVING AND INSTALLING FROM BRACKET |
|
| Axle Nut/Hub Nut | TORQUE SPECIFICATIONS | |
| Battery | ON-VEHICLE TESTING | |
| Brakes | ||
| Bleeding Sequence | ELECTRONIC STABILITY PROGRAM (WITH ESP 5.3) ELECTRONIC STABILITY PROGRAM (WITH ESP 5.7) |
|
| Disc Brakes | BRAKE SYSTEM IDENTIFICATION DISC BRAKE SPECIFICATIONS |
|
| Torque | TORQUE SPECIFICATIONS | |
| Charging | ||
| Generator | NA | |
| Torque | TORQUE SPECIFICATIONS | |
| Drive Belts | ||
| Adjustment | NA | |
| Belt Routing | DRIVE BELT ROUTING | |
| Engine Cooling | ||
| General Service Specifications | NA | |
| Radiator Cap Pressure | 1.4-1.6 Bar | |
| Thermostat R & I | COOLANT THERMOSTAT, REMOVING AND INSTALLING | |
| Water Pump R & I | COOLANT PUMP, REMOVING AND INSTALLING | |
| Engine Mechanical | ||
| Compression | COMPRESSION, CHECKING | |
| Oil Pressure | At 2000 RPM and oil temperature of 80°C: at least 2.0 Bar | |
| Overhaul | ENGINE CRANKSHAFT/CRANKCASE, DISASSEMBLY AND ASSEMBLY | |
| Torque | See Appropriate Procedure | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | |
| Flywheel/Flex Plate Torque | Flywheel: 60 Nm + 180° Drive Plate: 60 Nm + 90° |
|
| Fuel System | ||
| Pressure Specification | 3.8 to 4.2 Bar | |
| Fuel Pressure Test Procedure | FUEL PRESSURE REGULATOR AND RESIDUAL FUEL PRESSURE, CHECKING | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER INDENTIFICATION | |
| Ignition Wires (Resistance) | Coil-On-Plug | |
| Ignition Wires (Routing) | Coil-On-Plug | |
| Spark Plug | TEST DATA, SPARK PLUGS | |
| Starting | ||
| Starter | REMOVAL & INSTALLATION (6-CYL) | |
| Torque | TORQUE SPECIFICATIONS | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |
| Torque | FRONT - TORQUE SPECIFICATIONS REAR - TORQUE SPECIFICATIONS (FWD) REAR - TORQUE SPECIFICATIONS (AWD) |
|
| Wheel & Tire | ||
| Wheel Lug Nut Torque | 120 Nm | |